Agricultural vehicles make farming very easy. If farmers use agricultural machines to sow crops, then tractors have a prominent place. It is a farming machine by which most agricultural tools are operated. Currently, oil prices are increasing continuously. In such a situation, the economic cost of the farmers is also very high, so the farmers must pay more attention to the tips to save diesel consumption in the tractor.
Detailed Tips To Save Diesel When Using A Tractor
This blog post will complete information about the tips which can save diesel in the tractor. However, the Same Deutz Fahr tractor is perfect for great performance at low fuel consumption.
Check The Fuel Injector Regularly
Black smoke coming out of the engine means more diesel is being spent. This could be due to a fault in the injector or injection pump. In such a situation, get the injector checked every other month. If black smoke continues to come out even after the injectors and injection pump are in place, it is a sign of additional load on the engine. In such a situation, keep the workload as much so that the engine does not give black smoke, and you can save diesel.
Drive The Tractor Vertically Rather Horizontally
Use the tractor such that it takes less time to roam on the sides of the field and more time can be driven in the field. Working in length instead of the width of the field can save diesel, resulting in cost-effective operations. To run agricultural machinery like pump sets or threshers, diesel engines should be driven on several such revolutions so the machine can get maximum rotations. Running these machines continuously increases the chances of wear and tear along with the diesel cost.
Ensure Proper Circulation Of Air In The Engine
If there is noise when the engine is started, less air is circulating in it, so diesel consumption will increase. Therefore, we must properly check the air circulation to save diesel and increase efficiency. However, every company provides instruction manuals for tractors and engines.
Inspection Of Engine Oil
It is crucial to inspect the engine’s oil at a given time. When the engine’s oil is too old, its power decreases, and diesel costs more. Therefore, change the engine’s oil and filter in due time to save diesel. For water pumping, the more water is thrown out of the pump set, the more diesel will be spent. So pump water with a tractor according to a standard height.
Cooling System Maintenance
Any internal combustion (IC) engine gets its power from burning fuel. But, during the power stroke, the cylinder temperature reaches about 1600°C, which can damage any part of the engine. Therefore, engine temperature management is a critical tip to save diesel. However, farmers prefer a Captain tractor for efficient cooling and higher performance.
Extremely high or high temperatures affect the working efficiency of the engine. Therefore, the temperature of the engine’s coolant is only about 80-90 degrees. Moreover, only clean and fresh water should be filled in the radiator, and the water should always be maintained appropriately. It should be kept in mind that salt-free water should be used in the radiator so the residue does not get deposited in the distribution pipe.
Proper Lubrication
The lubrication mechanism also plays an essential role in tractor operation, and it is essential to save diesel. Its main functions are:
- To control the heat generated by friction in different parts so that they do not have any heat generated during operation.
- To prevent the heat generated by friction in the pistons, cylinders, and bearings of the tractor through cooling and reduce the friction between them.
- Lubricants seal the cylinder liner, piston and piston ring so that the gas does not escape from the cylinder, which is crucial for farmers to save diesel.
- Lubricants also clean the engine by absorbing dust and carbon particles from the tractor engine and taking it out.
Only the correct grade (15W 40) oil should be used in the lubrication system. Otherwise, it can be harmful. Moreover, The oil level in the lubrication system should be between the top and bottom lines of the oil level gauge. Also, the oil used in the lubrication system should be changed regularly to save diesel. When the old filters are dirty, they should be replaced with new ones. And the pipes, valves, and pressure gauges of the lubrication system should be checked regularly.
Conclusion
This article explains the tips to save diesel in your tractor. This informative blog is helpful and helps you learn something new. Stay connected with us for more such content.
Stay tuned with us for more information about fuel-saving tips.